LOCTITE AA 326 is a yellow to amber, no-mix, medium viscosity (thixotropic) structural and magnet bonder which is activated with LOCTITE SF 7649.

LOCTITE® SF 7649 depend on the adhesive used and the substrate bonded. Fixture Time, ISO 4587, seconds: Steel (degreased) using LOCTITE® 326 ,, single side activation ≤30 (Fixture time is defined as the time to develop a shear strength of 0.1 N/mm²)

IT HAS GOOD ADHESION TO DIFFERENT TYPES OF FERRITES, A FIXTURE TIME OF 3 MINUTES & A SHEAR STRENGTH OF 15 N/MM². REQUIRES LOCTITE SF 7649 TO ACTIVATE.

TDS LOCTITE® AA 326™, December- Directions for use: 1. For best performance bond surfaces should be clean and free from grease. 2. To ensure a fast and reliable cure, Activator 7649™ should be applied to one of the bond surfaces and the adhesive to the other surface. Parts should be assembled within 15 minutes. 3.

LOCTITE® SF 7649 is designed to promote the curing speed of LOCTITE anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. LOCTITE SF 7649 offers good performance at low cure temperatures, and is recommended

TDS LOCTITE® 326, May-2004 TYPICAL PERFORMANCE OF CURED MATERIAL Adhesive Properties After 24 hours @ 22 C, Activator 7649 on 1 side Lap Shear Strength, ISO 4587: Steel

Part Number: LOCTITE 326/50ML Loctite AA 326 structural bonding – magnet bonder After 24 hours @ 22°C, Activator 7649 on 1 side

LOCTITE® SF 7649 depend on the adhesive used and the substrate bonded. Fixture Time, ISO 4587, seconds: Steel (degreased) using LOCTITE® 326 ,, single side activation ≤30 (Fixture

Информационни листове: Анаеробено лепило/326/50мл Активатор/7649/150 мл. за залепване на стъкло с метал - Loctite anaerobic glue 326 + activator 7649.

LOCTITE AA 326 is a yellow to amber, no-mix, medium viscosity (thixotropic) structural and magnet bonder which is 232692 Req. activator 7649 12/pkg.

LOCTITE®AA 326 is a general purpose structural adhesive that is used for fast cure and high shear strength. Typical applications include bonding ferrites to plated materials in electric motors, loudspeaker hardware and jewelry where fast fixturing is required. TYPICAL PROPERTIES OF UNCURED MATERIAL Specific Gravity @ 23°C 1.05

LK7649 Primer N Activator is a single component non-CFC solvent based surface activator. The activator is designed to promote the speed of cure of anaerobic adhesives and sealants such as LK324. LK7649 can be used with LK324 on specially designed Anaerobic connectors to increase the cure speed. LK7649 is equivalent of Henkel Locitte 7649.

It can crush all kinds of coarse, medium and fine materials (granite, limestone, concrete, etc.) with a feed particle size not exceeding 500mm and a compressive strength not exceeding 350MPa. , Energy, cement, chemical, construction and other industries

LOCTITE® AA 326 Known as LOCTITE® 326 August- PRODUCT DESCRIPTION LOCTITE® AA 326 provides the following product After 24 hours @ 23 C, Activator 7649 on 2 sides Lap Shear Strength, ISO 4587: Steel (grit blasted) : 0.25 mm 100

TDS LOCTITE® 326, May-2004 TYPICAL PERFORMANCE OF CURED MATERIAL Adhesive Properties After 24 hours @ 22 °C, Activator 7649 on 1 side Lap Shear Strength, ISO 4587: Activator 7649 should be applied to both surfaces. Parts should be assembled immediately (within 1 minute). 4. Excess adhesive can be wiped away with organic solvent.

TDS LOCTITE® AA 326™, December- TYPICAL PROPERTIES OF CURED MATERIAL Physical Properties: Coefficient of Thermal Expansion, ISO 11359-2, K-1 80×10-6 Activator 7649™ should be applied to both surfaces. Parts should be assembled immediately (within 1 minute). 4. Excess adhesive can be wiped away with organic solvent.

Loctite 326 & 7649 Anaerobic and activator UK Approving Authority Approval Type Date of Approval WRAS Potable Water 12/31/ Registration Number Standard Approval Status 1612522 BS 6920 Expired Country Contact Certificate of Approval External Link:

Henkel Loctite SF 7649 is a anaerobic primer that is designed to promote the speed of cure of anaerobic adhesives and sealants. Recommended for use when temperature is below 15 °C. This product complies to MIL-S-22473E. 1.75 oz Bottle. Part Number: 135286 Henkel Loctite SF 7649 is a anaerobic primer that is designed to promote the speed of

LOCTITE AA 326 is a yellow to amber, no-mix, medium viscosity To ensure a fast and reliable cure, Activator 7649™ should be applied to one of the bond 

LOCTITE SF 7649 是一款用於表面處理的溶劑型促進劑，可在低溫下固化。. LOCTITE® SF 7649可提高 LOCTITE 厭氧膠和密封膠的固化速度，並不會明顯降低粘接強度。. 本產品尤其適用於存

Mfr #, 21348. Speedbonder Type, ODC-Free Primer for # 326 LOCTITE® 7649 is used where increased cure speed of. LOCTITE® anaerobic products is required.

Add to comparison. LOCTITE SF 7649 is a solvent-based activator for surface preparation that provides for low temperature curing. LOCTITE® SF 7649 is designed to promote the curing speed of LOCTITE anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals

Loctite 326 & 7649, Anaerobic and activator, UK. Approving Authority, Approval Type, Date of Approval. WRAS, Potable Water, 12/31/2016.

LOCTITE® 326 provides the following product characteristics: Technology. Acrylic To ensure a fast and reliable cure, Activator 7649 should.

TDS LOCTITE® 326, May-2004. TYPICAL PERFORMANCE OF CURED MATERIAL. Adhesive Properties. After 24 hours @ 22 °C, Activator 7649 on 1 side.

LOCTITE® AA 326 is a polyurethane methacylate acrylic adhesive designed for bonding LOCTITE® SF 7649 Activator Aerosol 150ml - £13.08 £15.70 (inc VAT).